43 / EN
Problem Reason Soluton
Foam is overflowing from
the detergent drawer.
Too much detergent s used.
Mx 1 tablespoonful softener and
½ l water and pour nto the man
wash compartment of the detergent
drawer.
Put detergent nto the product
sutable for the programmes and
When you use addtonal chemcals
(stan removers, bleaches and etc),
reduce the amount of detergent.
Laundry remains wet at the
end of the programme. (*)
Excessve foam mght have occurred and
automatc foam absorpton system mght have
been actvated due to too much detergent usage.
Use recommended amount of
detergent.
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to
prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-
spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION:
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or an Authorised Service Agent. Never try to repair a nonfunctional
product yourself.