Need help?Do you have a question about the bluelab Guardian Monitor and is the answer not in the manual?
General| Measurement Parameters | pH, Temperature, Conductivity |
|---|---|
| pH Range | 0.0 to 14.0 |
| pH Accuracy | ±0.1 |
| Temperature Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Conductivity Resolution | 0.01 mS/cm |
| Display Type | LCD |
| ATC | Yes |
| Operating Environment | 0 to 50 °C |
| pH Resolution | 0.1 pH |
To Next Page
