EasyManua.ls Logo

Bluetti AC200MAX - Safety Instruction

Bluetti AC200MAX
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Just Power On
1. BRIEF INTRODUCTION
For I/O capability, the AC200MAX features higher continuous output power at
2,200W from its pure sine wave inverter, 100W PD3.0 USB-C port, upgraded
MPPT controller which now handles up to 900W solar input, and built-in 30A
NEMA TT-30 outlet designed for RV crowds especially.
Most significantly, considering customers' feedback, comments, and product
upgrade need, the BLUETTI AC200MAX now supports Bluetooth connection and
the new BLUETTI Smartphone App (iOS & Android) remote control.
Furthermore, the AC200MAX also supports up to 2 expandable battery packs,
using either the BLUETTI B230 or B300. With 2 BLUETTI B300, the capacity of
AC200MAX then will expand to a massive 8192Wh to run your every essential
needs at home or on the go for hours, days, or even more than a week!
2. ABBREVIATION
● BMS: Battery Management System
● MPPT: Maximum Power Point Tracking
● SOC: State of Charge
● AC: Alternating Current
● DC: Direct Current
● PV: Solar Panel(s) Charging (Photovoltaic)
● Grid: Home Power Supplied by Utility
● DOD: Depth of Discharge
● ECO Mode: A power-saving setting for the AC200
MAX. When it is on, the
AC power will automatically turn off over 4 hours low load (≤50W) or no
load to save power drain.
3. SAFETY INSTRUCTION
● DO keep the AC200MAX away from the fire and heat.
● DO operate the AC200MAX in a dry and well-ventilated place. If it gets
moisturized or damp, please dry it thoroughly before use.
● DO NOT obstruct fan openings to ensure proper ventilation in use. Otherwise,
permanent damage to the AC200MAX may occur.
● DO NOT move the unit while operating as vibrations and sudden impacts
may lead to poor connections to the hardware inside.