41
BLUETTI
Bluetooth Pairing Guide
Scope of Application
This guide applies to BLUETTI products that support Bluetooth.
Function
htooteulB ygrene wol ni-tliuB .0.5 htooteulB troppus stcudorp ITTEULB llA ●
modules can interact with other Bluetooth devices within a range of 10m.
● Pair your device with BLUETTI app, remotely monitor and control it on your
phone or other smart devices.
● For BLUETTI products with LCD screen, you can enable and disable Bluetooth
on the screen: ʻSettingʼ - ʻBluetoothʼ - ʻONʼ or ʻOFFʼ.
For those without LCD screen, you can do that by pressing the Bluetooth
button.
● Transferable Data:
(1) Display Data
a) AC On/Off Status
b) Charge and Discharge Power
c) Model Code
d) Alarm History
e) Firmware Version
f) SOC (State of Charge)
(2) Control Data
a) AC and DC ON
b) System Parameters Setting (E.g., AC output frequency)
c) Charge and Discharge Time (Available for particular models)
d) Empty and Full Capacity Setting (Available for particular models)
e) OTA (Over-the-air) Firmware Upgrade
Bluetooth Pairing
eht wolloF .yalP elgooG ro erotS ppA morf ppa ITTEULB eht daolnwoD ●
instructions to register your B
LUETTI product.
● Power on BLUETTI product and wait for Bluetooth initialization (10s).
● Bluetooth of BLUETTI product is activated by default. Open BLUETTI app,
search the Bluetooth name (Model + SN) and pair.
To Next Page
Loading...
