7. Charging
AC240 supports four charging methods: AC, solar, car, generator，and Lead-acid battery.
Attention:
• Double-check that all cables are firmly plugged in.
• Avoid getting the plug and socket wet to prevent any potential damage.
7.1 AC Charging
Plug the AC240 into a standard wall outlet and start charging. Once it's fully charged, the
AC240 automatically stops charging to prevent overcharging. For a fast charge, you can
enable Turbo Charging in the BLUETTI App, which allows for an 80% capacity in just 45
minutes at an ambient temperature of 25°C (77°F).
7.2 Solar Charging
Connect the solar panels (in series or parallel) to AC240 via the solar charging cable. When
receiving a continuous input of 1200W, the AC240 can be charged up to 80% in about 1.3
hours.. However, please be aware that the charging time may vary based on weather
conditions, sunlight intensity, panel orientation, and other variables.
Note:
• Make sure your solar panels meet the following requirements:
Voc: 11V-60V Current: 21A Max. Power: 1200W Max.
• Non-waterproof solar panels will lose efficiency if they get exposed in the rain for a
long time.
EN
JUST POWER ON
16
To Next Page
Loading...
