9.8 Grid Self-adaption Mode
If you can not charge the AC240 using a generator or unstable grid voltage because of
unstable voltage, it is recommended that you enable the Grid Self-adaption Mode through
the BLUETTI App to ensure a stable, safe charging experience for both the AC240 and your
devices.
9.9 Max. Grid Input Current
The Max. Grid Input Current is set to 10A by default. If the grid current doesn't match this
setting, adjust the setting in the BLUETTI App.
Attention:
A single AC240 unit allows a maximum grid input current of up to 16A.
If you need to increase the setting beyond the default 10A, please contact BLUETTI Customer
Service and request a password to make the necessary adjustments.
9.10 Exit Setting Mode
To save your AC240 settings and exit the Setting Mode, press and hold down both the DC
and AC Power Buttons at the same time.
Note: If you do not perform any operation in 1 minute, the AC240 will automatically exit the
Setting Mode, and no changes will be saved.
JUST POWER ON 23
EN
To Next Page
Loading...
