9.7 UPS Mode
With the UPS mode enabled, the AC240 can provide uninterrupted power to your essential
appliances during a power outage. And there are four different modes available through
the BLUETTI App, allowing you to choose the best option for your needs.
• Standard UPS Mode
In this mode, the AC240 and its expansion batteries (if any) are always charged using
available solar or grid power, ensuring that they are ready to provide backup power in
case of a grid failure. When the grid fails, the AC240 units seamlessly take over to keep
your devices running without any interruption.
Note: This mode is only available when two AC240 units are connected in parallel.
• Time Control UPS Mode
This mode allows you to program the AC240 to charge during off-peak hours when
electricity is cheaper. Then, during peak hours when electricity is more expensive, the
AC240 seamlessly switches over to power your devices, helping you to save money on
your electricity bills.
• PV Priority UPS Mode
In this mode, the AC240 is mainly charged by solar energy to save power. You can also set a
specific State of Charge (SoC) threshold. AC240 charges from the grid until reaching the
designated SoC, and then seamlessly switches to solar charging for the remaining capacity.
• Customized UPS Mode
Tailor your UPS settings to match your unique needs in this mode. Create personalized
schedules for charging and discharging, set battery SoC limits, and even control the grid
charging switch and scheduled charging switch according to your diverse requirements.
Mode
Standard
Turbo
Silent
Recharging Power
AC
800W Max.
2400W Max.
800W Max.
PV
800W Max.
1200W Max.
800W Max.
AC+PV
800W Max.
2400W Max.
800W Max.
Description
Fully charged in
about 3 hours
80% charge in
45 minutes
Low operation
noise less than 50dB
Note
More friendly to
AC240's battery.
Comes in handy
when recharging time
is a priority.
Offers a quiet,
low-power operation
for long battery life.
Icon
None
EN
JUST POWER ON
22
To Next Page
Loading...
