Appendix
Q: Can I use third-party solar panels to charge this product?
A: Yes, you can. As long as the specs of solar panels on DC1/DC2 fall in below range:
OCV&Vmp: 12-150V
Input Power: 1500W Max.
With the same power connector (MC4)
DO NOT mix different types of solar panels.
Q: Why can't the unit be charged when the solar panels are connected?
A: Please follow below steps:
1) Press the ‘PV’ on LCD screen to check whether the solar panels are connected successfully.
2) Check the connection of solar panels and the PV input cable.
If the symptom persists, please contact BLUETTI service team.
Q: How to choose the right UPS mode for my home?
A: The standard UPS mode is good for regions with unstable grid power supply;
The Time Control UPS mode saves your electricity bills by setting the charging and discharging time.
The PV Priority UPS mode is better for regions with plenty of sunlight all the year.
The Customized UPS mode allows you to design your own power supply system.
Q: How long will it take to switch the UPS?
A: 20ms.
Q: How to upgrade the firmware?
A: Connect the unit with BLUETTI App, then you can over-the-air (OTA) upgrade the firmware
including ARM, DSP, HMI, and BMS.
FAQs (Frequently Asked Questions)
25
To Next Page
Loading...
