Bluetti D100P - BLUETTI App; Troubleshooting and Maintenance

To Next Page

To Previous Page

3.6 BLUETTI App

With the BLUETTI App, you can conveniently monitor the operation status of the D100P,

conﬁgure its network settings, and review fault reports.

Scan the QR code below to download the BLUETTI App, or search for "BLUETTI" in the

App Store or Google Play.

Supported operating systems: iOS 11.0 or above, Android 8.0 or above.

For detailed instructions on how to monitor and control the inverter through the app,

please refer to the BLUETTI App User Manual.

System Temperature HighC015

System Temperature Low

4. Troubleshooting and Maintenance

Error Code Description

Battery Overvoltage

Battery Undervoltage

Battery Overcurrent

C001

C002

C003

C008

Troubleshooting

Poor Contact with

Battery Connection

1. Check if the cables and terminals

are connected properly.

2. Restart the system if connections

are accurate. If not, rectify them and

then restart.

3.If the issue persists, contact

BLUETTI support.

1. Check if the operating environment

is well-ventilated and the ambient

temperature remains within a

moderate range.

2. If conditions are appropriate, contact

BLUETTI support.

C016

JUST POWER ON 19