Bluetti D100P - Safety Instructions; Safety Guidelines; General Requirements

To Next Page

To Previous Page

1. Safety Instructions

Read this manual for instructions on the proper use and safety information for the

product. The safety instructions provided herein are for illustrative purposes that include

but are not limited to those listed in this manual. Actual operation shall comply with all

applicable safety standards. If you have any questions, feel free to contact BLUETTI

support or your local BLUETTI dealers.

1.1. General Requirements

1.1.1 Statement

To ensure a safe operation, it's crucial to observe and adhere to the following conditions:

• Always operate or store the unit in the conditions speciﬁed in this manual.

• Avoid unauthorized disassembly, component replacement, or modiﬁcation of software

codes.

BLUETTI shall not be liable for damages resulting from the following circumstances:

• Force majeure events such as earthquakes, ﬁres, storms, ﬂoods, or mudslides.

• Damage caused by the customer's own transportation.

• Damage caused by customer's negligence, improper operation, or intentional actions.

• System or hardware damage caused by third parties or customers, including but not

limited to improper handling and installation not in accordance with the instructions

in this manual.

• Damage caused by adjustments, changes, or removal of labels in violation of this

manual.

• Issues incurred after the warranty period has expired and in the absence of extended

warranty service.

1.1.2 Safety Instructions

WARNING - When using this unit, basic precautions should always be followed, includ-

ing the following:

• Do not install, use and maintain the unit in adverse weather conditions such as

lightning, rain, snow, and strong breezes (including but not limited to handling and

operating the unit and cables, plugging and unplugging signal connections to

outdoor facilities, working at height, outdoor installations, etc.).

• Always turn off the power source before starting any electrical work.

• Do not disassemble, modify, tamper with or repair the unit on your own.

• Regularly inspect the unit and its accessories for damage or deterioration.

• Use a tester to check for the presence of dangerous voltage before touching any

conductor or terminal.

JUST POWER ON