Bluetti EP500Pro - Page 51

064 Multi Brak Phase Error
Please check if the input of the AC voltage
meets the specifications of the unit.
Clear the alarm history or restart the unit.
065
081 BMS Communication Interrupt
Please contact the dealer if the symptom
persists after rebooting the unit.
082 LCD Communication Interrupt
Please contact the dealer if the symptom
persists after rebooting the unit.
083 EEPROM Read & Write Error
Please contact the dealer if the symptom
persists after rebooting the unit.
084 DSP Configuration Error
Please contact the dealer if the symptom
persists after rebooting the unit.
085 RTC Read & Write Error
Please contact the dealer if the symptom
persists after rebooting the unit.
088
USB/TYPE-C/PD Port Current High
Disconnect the appliances connected to the
USB ports.
Clear the alarm history or restart the unit.
091 DC Output soft start Failure
Please contact with the dealer if the error still
exists after rebooting the unit.
092 DC 12V/30A Output Short Circuit
Disconnect the appliances connected to DC
output ports.
086 12V/30A Port OCP
Disconnect the appliances connected to the
12V/30A RV port.
Clear the alarm history or restart the unit.
087 24V/10A Port OCP
Disconnect the appliances connected to the
24V/10A cigarette lighter port.
Clear the alarm history or restart the unit.
089 DC 12V/30A Output Current High
Disconnect the appliances connected to the
12V/30A RV port.
Clear the alarm history or restart the unit.
090 DC 24V/10A Output Current High
Disconnect the appliances connected to the
24V/10A cigarette lighter port.
Clear the alarm history or restart the unit.
PV Paralleling Error
Please check if the "PV parallel enable" setting
is consistent with PV input.
Please contact the dealer if the symptom
persists after rebooting the unit.
51
JUST POWER ON