16
1. Thread the strap through the openings in the retaining bracket. Make sure the velcro fastening surfaces are facing outwards
(in the direction of the wheels) and that the strap is not twisted in any way. (Images 1,2)
2. Thread the strap around the hoverboard. Open, by pressing down, the metal buckle of the strap and insert the other end of
the strap through the opening of the metal buckle (from the bottom of the hoverboard to the outside). Pull the strap through
until the hoverboard is secure on the strap and the strap is tight (Images 3,4)
3. Securely press the two velcro surfaces together so that the belt does not drag on the ground or impair or block the wheels
in any way. (Image 5)
The Hoverboard is now ready for use.
3. STRAP ATTACHMENT
1 2
4
3
5
To Next Page
Loading...
Need help?
General