BLUM AVENTOS HK - Page 12

AVENTOS HK top Planning Specifications
for Narrow Aluminum
AVENTOS
Minimum gap
NOTE: Min gap assumes door radius of 1
and a maximum top overlay of 25.4
Minimum bottom reveal
Door and Hardware Clearance
1.5 min.
2 min.
Decorative molding clearance
Door thickness 16
19 22 26
maximum X
70 59 49 35
X
door thickness
Lift mechanism clearance Lift mechanism positioning
Attachment for lift mechanism for wood screws including positioning template.
1
2
SERVO-DRIVE
91
30 30
Door and hardware clearance
Door and Hardware Clearance and Positioning
187 min.
572 max.
192 min.
250 (10") to 610 (24")
Z
door height + 1.5
173 min.
235 min.
SERVO-DRIVE
NOTE: Z = door height x 0.29 + door thickness minus
top panel thickness
© 2021 Blum, Inc. Subject to technical modifications without notice
12