BLUM TC52 - Safety Precautions

Safety
©byBlum‐Novotest
5
V2A|04/2018
2. Safety
CAUTION!
Damageofthemeasuringsystemduetooperatingerrorispossible.
 Handlethemeasuringsystemlikeaprecisiontool.
 Keepthemeasuringsystemclean.
 Mountthemeasuringsysteminassignedtoolholdersonly.
 Limitthemeasuringblockovertravelbyprogramming,seechapter5..
 Readandobserveallnotesofthemachinetoolmanufacturer.Donotdisablesafetyinter‐
lockings.
NOTICE
Damageofthemeasuringsystembyashortcircuitispossible
Aggressiveliquidsmaydestroyseals.
 Donotoperatethemeasuringsysteminaworkingenvir onmentwithaggressivecoolants!
Coolantsmustnot containaggressivecontents,thatcandamageplasticsorrubberparts
(e.g.:acetone,alcohol,ethanol,methanol,cleaningbenzine,solvents,...).
 Coolantsmaynotex ceedaph‐levelof9.5.
 Pleasecontactusifyouhaveanyque stions!Wealsohavesolutionsforspecialapplications.