PLA88CS USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
11
User Audio Control Page
A logged in User or Admin Audio Control Page allows a user to change the source audio of the Matrix per output, as
well as adjust the line level volume output or enable/disable the muting of the analogue or digital outputs. The Audio
Select drop down menu allows selection of Audio Return Channel either via HDMI or RX from compatible RX150CS
HDBaseT™ Receiver.
The User also has the ability to enable or disable the audio downmixing mode. When enabled, the audio output will be
downmixed from multichannel Dolby Audio or DTS Audio to 2ch PCM audio.
To downmix audio via an HDBaseT™ output, select “DSP Analogue Audio x” corresponding to the specific HDBaseT™
output to downmix audio from.
To Next Page
Loading...
