PLA88CS USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
27
Web-GUI Firmware Update
The web-GUI of the Matrix is used to configure and control the product through a web portal. The Matrix can be
accessed on any network connected device including: tablets, smart phones and laptops that are on the same
network.
As the web-GUI is used to update the main Matrix firmware it is important to make sure that the web-GUI firmware is
the latest version. Please check your firmware version against the version available to download from the Blustream
website.
To update the web-GUI firmware:
1) Login to the web-GUI update menu:
Default IP Address is: 192.168.0.200:100
Default Username is: blustream Default Password is: 1234
Please note: the IP address may dier if default network settings have been updated. If this is the case, please replace
the following with the products current IP address:
XXX.XXX.XXX.XXX:100
2) When the web-GUI menu interface has been accessed, expand the ‘Administration’ file in the menu tree by clicking
the small ‘+’ icon next to the file.
3) Select ‘Upload Firmware’:
To Next Page
Loading...
