PLA88CS USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk12
Configuration IR Select Page
The Configuration IR Select Page allows the IR routing of the Matrix to be amended. Simply select the square that
corresponds with the input and zone output to set up a bi-directional IR relationship with, to have IR route only
between that input to output.
By enabling the ‘IR Follow Video Switching’ setting, IR will no longer have a fixed route. IR from zones will be
transmitted to the input corresponding with whichever video input is selected. IR inputs will be transmitted to
whatever outputs zones are currently viewing this input source.
Configuration Video Input Page
The Configuration Video Input Page allows Users to change settings specific to the inputs of the Matrix.
The name of each input can be amended, the EDID of each input can be set, as well as enable or disable CEC to the
input. It is also possible to select the priority mode for dual inputs featuring both HDMI and HDBaseT™ connections
between auto switch mode and fixed selection mode.
To Next Page
Loading...
