BluStream PLA88CS - Page 24

PLA88CS USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk24
RS-232 Configuration and Telnet Commands
COMMAND ACTION
?/HELP Print Help Information
STATUS Print System Status And Port Status
INSTA Print All Input Status
OUTSTA Print All Output Status
CTRLSTA Print All Control Status
HDBTSTA Print All HDBT Status
PRESETSTATUS Print All Preset Configurations
PON/OFF Set System Power On Or O
KEY ON/OFF Set System Key Control On Or O
IR ON/OFF Set System Front Panel IR Control On Or O
LCD ON/OFF
Set LCD Aways On Or Set LCD O Aer No Operation 30
Seconds
IROUTxx ON Enable IR Remote-control Mode On HDBT Output xx
IROUTxx OFF Disable IR Remote-control Mode On HDBT Output xx
IROUTxx SIMPLE ON
Enable IR Simple Remote-control Mode On HDBT Output xx
IROUTxx SIMPLE
OFF
Disable IR Simple Remote-control Mode On HDBT
Output xx
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
IRINxx ON Enable IR Remote-control Mode On HDBT Output xx
IRINxx OFF Disable IR Remote-control Mode On HDBT Output xx
IRINxx SIMPLE ON
Enable IR Simple Remote-control Mode On HDBT Input
xx
IRINxx SIMPLE OFF
Disable IR Simple Remote-control Mode On HDBT Input
xx
xx = 00 : All Inputs
xx = [01-02] : Input 1 - 2
RESET
Reset System To Default Setting
(Type ""Yes"" To Confirm, Or Send Other Command To
Discard)
POCOUTxx ON Set PoC On On Output xx
POCOUTxx OFF Set PoC O On Output xx
POCINxx ON Set PoC On On Input xx
POCINxx OFF Set PoC O On Input xx
OUTxx ON Set Output xx On
OUTxx OFF Set Output xx O
OUTxx FR yy
Set Output From Input yy
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
yy = [01-08] : Input 1 - 8
OUTxx EH Priority Output for EDID Copy and CEC = HDMI
OUTxx ET
Priority Output for EDID Copy and CEC = HDBT
xx = 00 : All Outputs 5 - 8
xx = [05-08] : Output 5 - 8
INxx EH Priority Input for EDID Updata and CEC = HDMI
INxx ET
Priority Input for EDID Updata and CEC = HDBT
xx = 00 : All Inputs 1 - 2
xx = [01-02] : Input 1 - 2
COMMAND ACTION
INxx SWMODE yy
Set HDBT/HDMI Input xx Switching Mode yy
xx = 00 : All HDBT/HDMI Inputs
xx = [01-02] : Input 1 - 2
yy = 00 : Force HDMI Mode(default)
= 01 : Force HDBT Mode
= 02 : (5v Detect Mode,Auto Switch HDMI Priority)
= 03 : (5v Detect Mode,Auto Switch HDBT Priority)
= 04 : (5v Detect Mode,Auto Switch No Priority)
= 05 : (TMDS Detect Mode,Auto Switch HDMI Priority)
= 06 : (TMDS Detect Mode,Auto Switch HDBT Priority)
= 07 : (TMDS Detect Mode,Auto Switch No Priority)
AUDIOxx FR yy
Set Audio Output xx From Input yy
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
yy = [01-08] : Audio From Input 1 - 8
yy = [09-16] : Audio From Output 1 - 8
yy = [17-24] : Audio From ARC 1 - 8
yy = [25-26] : Optical Input 1 - 2
yy = [33-34] : Analogue Input 1 - 2
AUDIOxx DMIX yy
Set Audio Output xx Downmix Mode yy
xx = 00 : All Outputs
xx = [01-08] : Analogue Output 1 - 8
xx = [09-16] : Optical Output 1 - 8
yy = [ON]:Audio Downmix On
yy = [OFF]:Audio Downmix O
AUDIOxx Delay yy
Set Audio Output xx Delay yy Ms
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
yy = [0-1000]:Audio Delay yy Ms(Only Support On Downmix
On Mode Or Input Audio is LPCM 20 When Downmix O Mode)
OUTxx EMBED yy
Set HDMI/HDBT Output xx EMBED Audio From Input yy
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
yy = 00 : No Audio Embed
yy = [01-08] : Audio From Input 1 - 8
yy = [09-16] : Audio Follow Video (default) (pass through
mode,not use embed audio)
yy = [17-24] : Audio From ARC 1 - 8
yy = [25-26] : Optical Input 1 - 2
yy = [33-34] : Analogue Input 1 - 2
yy = [49-56] : Audio From DSP 1 - 8
MUTE mm TX xx
Turn Mute On/O On Output xx
mm = On
mm = O
xx = 00: All Outputs
xx = 01 - 08: Analogue Output 1 To 8
xx = 09 - 16: Optical Output 1 To 8
AUDOUT xx mm
Turn Mute On/O On Output xx
mm = On
mm = O
xx = 00: All Outputs
xx = 01 - 08: Analogue Output 1 To 8
xx = 09 - 16: Optical Output 1 To 8
VOLxx TX yy
Set Volume Level xx On Output yy
xx = [0...100]: Set Volume Level
xx = +: Volume Level Increases
xx = -: Volume Level Decreases
yy = 00: Select All Output Ports
yy = [01...08]: Select Single Output Port 01 To 08
OUT xx ARC aa
Set RX150CS On Output xx To ARC Mode aa
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
aa = 01 : ARC From Optical
aa = 02 : ARC From HDMI