PLA88CS USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
25
RS-232 Configuration and Telnet Commands
COMMAND ACTION
OUT xx SCALING
ON/OFF
Set Output xx Scaling ON/OFF
OUT xx LR ON/OFF
Set Output xx Long Reach ON/OFF
xx = 00 : All Outputs
xx = [01-08] : Output 1 - 8
IN xx LR ON/OFF
Set Intput xx Long Reach ON/OFF
xx = 00 : All Inputs
xx = [01-02] : Input 1 - 2
MXRS232OUT xx
FR yy
Set Remote Rx xx RS232 From Local Matrix RS232 yy
xx = [01-08] : Remote Rx1 - Rx8 RS232
xx = 00 : All Remote Rx RS232
yy = [01-08] : Local Matrix RS232 1 - 8
yy = [09-10] : Remote Tx1 - Tx2 RS232
MXRS232IN xx FR yy
Set Remote Tx xx RS232 From Local Matrix RS232 yy
xx = [01-02] : Remote Tx1 - Tx2 RS232
xx = 00 : All Remote Tx RS232
yy = [01-08] : Local Matrix RS232 1 - 8
MXIRRX xx FR yy
Set Remote Rx xx IR Out From Local Matrix IR In yy Or Tx
yy IR In
xx = 00 : All Remote Rx IR Out
xx = [01-08] : Remote Rx1 - Rx8 IR Out
yy = 00 : Remote Rx IR Out OFF
yy = [01-08] : Local Matrix IR In 1 - 8
yy = [09-10] : Remote Tx1 - Tx2 IR In
MXIRTX xx FR yy
Set Remote Tx xx IR Out From Local Matrix IR In yy Or Rx
yy IR In
xx = 00 : All Remote Tx IR Out
xx = [01-02] : Remote Tx1 - Tx2 IR Out
yy = 00 : Local Matrix IR In OFF
yy = [01-08] : Local Matrix IR In 1 - 8
yy = [09-16] : Remote Rx1 - Rx8 IR In
MXIR xx FR yy
Set Local Matrix IR Out xx From Remote Rx/Tx yy IR In
xx = [01-08] : Local Matrix IR Out 1 - 8
yy = [01-08] : Remote Rx1 - Rx8 IR In
yy = [09-10] : Remote Tx1 - Tx2 IR In
yy = 00 : All Remote Rx/Tx IR In
IRFV ON/OFF Local Matrix IR Out Follow Video Switching ON/OFF
EDID xx DF zz
Set Input xx EDID To Default EDID zz
xx = Input On Product (00 Refers To ALL Inputs, 02 = Input 2 Etc)
zz = 00: HDMI 1080p@60Hz, Audio 2CH PCM (Default)
01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
03: HDMI 1080i@60Hz, Audio 2CH PCM
04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
06: HDMI 1080p@60Hz/3D, Audio 2CH PCM
07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY
08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD
09: HDMI 4K@30Hz 4:4:4, Audio 2CH PCM
10: HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
11: HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
12: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 2CH PCM
13: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
14: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
15: HDMI 4K@60Hz 4:4:4, Audio 2CH PCM
16: HDMI 4K@60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
17: HDMI 4K@60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
18: DVI 1280x1024@60Hz, Audio None
19: DVI 1920x1080@60Hz, Audio None
20: DVI 1920x1200@60Hz, Audio None
21: HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM
22: User EDID 1
23: User EDID 2
COMMAND ACTION
EDID xx CP yy
Copy EDID From Output yy To Input xx
xx = [00-08] : 00 : All Inputs, Input 1 - 8
yy = [01-08] : Output 1 - 8
EDID SAVE yy TO zz
Save External EDID yy Into Slot zz
yy = [01-08]: EDID Copy Output 1 - 8
yy = 00: EDID Via RS232 Send To Matrix
zz = 00: All User EDID
zz = 01 or 22: User EDID 1
zz = 02 or 23: User EDID 2
PRESET pp SAVE Save Current Output Connections To Preset pp Config
PRESET pp CLR
Delete Preset pp Config
pp = [00-09] : 00 : All Presets, Preset 1 - 9
PRESET pp APPLY
Apply Preset pp Config To Output Connection
pp = [01-09] : Presets 1 - 9
OUTxx CEC ENABLE Enable CEC Control On Output xx
OUTxx CEC DISABLE Disable CEC Control On Output xx
OUTxx CEC OK Confirm Operation (Enter) On Output xx
OUTxx CEC UP UP On Output xx
OUTxx CEC DOWN DOWN On Output xx
OUTxx CEC LEFT LEFT On Output xx
OUTxx CEC RIGHT RIGHT On Output xx
OUTxx CEC RETURN RETURN On Output xx
OUTxx CEC EXIT EXIT On Output xx
OUTxx CEC VOLUP VOLUME UP On Output xx
OUTxx CEC
VOLDOWN
VOLUME DOWN On Output xx
OUTxx CEC MUTE Toggle Audio MUTE Status On Output xx
OUTxx CEC PLAY PLAY On Output xx
OUTxx CEC STOP STOP On Output xx
OUTxx CEC PAUSE PAUSE On Output xx
OUTxx CEC RECORD RECORD On Output xx
OUTxx CEC INPUTyy
Input Channel yy Selection On Output xx,
The Operation Needs To Wait For TV Communication To Succeed
xx = 00: All Output Port
xx = [01-08]: Output 1 - 8
yy = [01-04]: TV's HDMI Input 1 - 4
yy = 00: Current HDMI Input
y y = []:(No Parameter) Will Show Input Select Menu If TV Support
OUTxx CEC POFF POWER OFF On Output xx
OUTxx CEC PON
POWER ON On Output xx
xx = 00: All Output Port
xx = [01-08]: Output 1 - 8
INxx CEC ENABLE Enable CEC Control On Input xx
INxx CEC DISABLE Disable CEC Control On Input xx
INxx CEC OK
Confirm Operation (Enter) On Input xx
INxx CEC UP UP On Input xx
INxx CEC DOWN DOWN On Input xx
INxx CEC LEFT LEFT On Input xx
To Next Page
Loading...
