Our SM11 HDMI Signal Manager has been designed to help solve HDMI
compatibility, HDCP2.2, clock stretching, EDID and handshaking issues
that are becoming common problems when distributing HDMI signals. The
SM11 also features de-embedding and embedding audio within the HDMI
signal path, allowing you to breakout up to 7.1 channel audio signals. The
SM11 supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and
including 4K @ 60Hz 4:4:4.
Introduction
FEATURES:
• Can help to solve most HDMI, EDID, HDCP, compatibility, and handshaking issues
• Supports full HDMI 2.0 specification 4K UHD video (4K @ 60Hz 4:4:4)
• HDCP 2.2 compliant
• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD
Master Audio transmission (HDMI pass through)
• Embed stereo analogue (L/R) audio using 3.5mm stereo jack input in place of source audio onto the HDMI output
signal path
• HDMI audio extracted to both analogue L/R audio and coaxial digital outputs concurrently
• Extract audio with or without a connected display - acts as an end-sink
• Supports HDR (High Dynamic Range) pass through
• Supports 3D signal display
• Advanced EDID management
To Next Page
Loading...
Need help?
General
