Need help?Do you have a question about the BMPRO BatteryPlus35 Series and is the answer not in the manual?
General| Max Output Current | 35A |
|---|---|
| Maximum Charge Current | 35A |
| Battery Type Compatibility | LiFePO4 |
| Nominal Voltage | 12V |
| Operating Temperature Range | 0°C to 50°C |
| Communication | Bluetooh |
| Protection Features | Over Temperature, Reverse Polarity |
Identifies the main power cable and various input connection ports on the unit.
Describes the positive/negative load outputs and the remote switch terminal.
Explains load output indicators, system status indicator, and CAN bus connector.
Guidance on replacing existing batteries with compatible ones for the unit.
Step-by-step instructions for safely connecting and disconnecting batteries, including multiple.
Details how the unit utilizes auxiliary, mains, and solar power inputs for operation.
Explains charging processes, current limits, and management strategies for different battery types.
Describes LVD, ECO, and Storage modes for protecting battery health and conserving power.
Instructions for storage mode and handling heavily discharged lead-acid and LiFePO4 batteries.
How the unit functions as a standalone power supply without a connected battery.
Details electronic fuses and overload protection for various fault conditions.
Guidelines for proper cleaning, care, and professional servicing of the unit.
Advice on preparing the unit and battery for long-term storage and periodic recharging.
Common problems related to battery monitoring and connection faults.
Troubleshooting steps for loads not receiving power and understanding ECO/Storage modes.
Explains reasons for low solar output and tips for optimization.
Explains LED color codes and flashing patterns for unit status.
Details the algorithm's charging stages (Soft Start, Bulk, Absorption, Float) and their durations.
Specifies voltage and current limits for each charging mode across different battery types.
To Next Page
