7
MOUNTING
It is essential the SwayControl is mounted in the correct orientation.
WARNING
DO NOT drill holes in the SwayControl for any reason. Drilling holes or puncturing the
unit will void your warranty.
Mount the SwayControl to the caravan/trailer using the mounting flanges
located on the sides of the unit. Use four 10G hex head self-drilling screws (not
supplied) to mount the SwayControl.
It is recommended that starlock washers are used and that mounting screws
are securely tightened to hold the SwayControl firmly in position and to avoid
becoming loose from vibration.
To Next Page
Loading...
Need help?
General
