Briefly press TRIP 1 in each
case to select the following
parameter in SETUP.
Set time display CLOCK.
Set the date DATE.
Switch ASC on or off ASC
ON / ASC OFF; or calibrate
ASC ASC CAL.
with anti-theft alarm system
(DWA)
OE
Automatically activate the alarm
function of the anti-theft alarm
system after switching off the
ignition DWA ON or leave de-
activated DWA OFF.
Exit SETUP EXIT.
Exit SETUP
There are four ways to exit
SETUP.
Press and hold TRIP 1.
The on-board computer is dis-
played.
Alternatively: Briefly press
TRIP 1 repeatedly until
SETUP EXIT is displayed.
Press and hold INFO 2.
The on-board computer is dis-
played.
Alternate method: Switch the
ignition off and then on.
The on-board computer is dis-
played.
Alternatively: Drive off.
Speed for the operation
is in SETUP
max 6 mph (max 10 km/h)
When the permissible speed
for operation is exceeded,
SETUP ends.
The on-board computer is dis-
played.
All settings are saved irre-
spective of how SETUP was
closed.
Time and date
Set clock
The Maxi-Scooter is stationary.
Switch on the ignition.
The onboard computer is dis-
played.
4
48
z
Operation
To Next Page
Loading...
