Light signals on DWA LED
1 flash: Motion sensor 1
2 flashes: Motion sensor 2
3 flashes: Ignition switched on
with unauthorized ignition key
4 flashes: DWA disconnected
from motorcycle battery
5 flashes: Motion sensor 3
Deactivate DWA
Switching on ignition ( 42).
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
DWA is now switched off.
Adjust DWA
The Maxi-Scooter is stationary.
Switch on the ignition.
The onboard computer is dis-
played.
Selecting the SETUP ( 47).
SETUP 3 is started. The dividing
line 4 is hidden.
SETUP DWA is displayed.
Briefly press INFO 2 to switch
between DWA ON 5 and
DWA OFF .
The following settings are avail-
able:
DWA ON: DWA is activated
respectively is activated auto-
matically when the ignition is
switched off.
DWA OFF: DWA is deacti-
vated.
Press and hold TRIP 1 to exit
SETUP.
The onboard computer is dis-
played.
Heated handlebar grips
with heated handlebar grips
OE
Operating heated grips
Start engine.
NOTICE
The heated grips option can only
be activated when the engine is
running.
4
54
z
Operation
To Next Page
Loading...
