SETUP ASC is displayed.
Short-press INFO 2 to tog-
gle between ASC ON 5 and
ASC OFF.
SETUP ASC OFF is dis-
played.
ASC warning light lights up.
ASC is switched off.
Long-press TRIP 1 to exit
SETUP.
The onboard computer is dis-
played.
Even with ASC switched off,
engine speed is governed to
prevent extreme acceleration
of the rear wheel while clear of
the ground. This is in order to
protect the drive train.
Switch on ASC
The Maxi-Scooter is stationary.
Switch on the ignition.
The onboard computer is dis-
played.
Selecting the SETUP ( 47).
SETUP 3 is started. The dividing
line 4 is hidden.
SETUP ASC is displayed.
Short-press INFO 2 to tog-
gle between ASC ON 5 and
ASC OFF.
SETUP ASC ON is displayed.
ASC-warning light remains
OFF.
ASC is switched on.
Long-press TRIP 1 to exit
SETUP.
The onboard computer is dis-
played.
Alternatively, switch the ignition
off and on again.
If the ASC warning light con-
tinues to light up after switch-
ing the ignition off and then
4
51
z
Operation
To Next Page
Loading...
