Actuate windshield button to
stop automatic drive.
NOTICE
Windshield returns to the park
position after the ignition is
switched off.
Avoid being dazzled by sunlight.
The parking position is around
the center of the adjustment
range.
Automatic park position after
ignition OFF
When the ignition is switched
off the windshield returns auto-
matically to park position.
Automatic drive starts only if
the windshield travel position
is higher than the parking posi-
tion.
If the windshield encounters
resistance before it reaches
its limit position the pressure-
sensitive finger guard system
goes active. The windshield
stops moving.
Automatic drive stops imme-
diately if the windshield rocker
switch is operated.
If the ignition is switched on in
automatic drive, the windshield
moves towards the drive posi-
tion again.
Automatic drive after ignition
ON
When the ignition is switched
on, the windshield returns to
the last drive position.
Automatic drive starts only if
the windshield travel position
is higher than the parking posi-
tion.
Automatic drive stops imme-
diately if the windshield rocker
switch is operated.
If the ignition is switched on
during automatic drive the
windshield moves towards the
park position again.
If automatic drive ends or is
stopped, the windshield can
be adjusted with the rocker
switches while the engine is
running.
Adjusting windshield
Switching on ignition ( 42).
The windshield moves from
the wiper park position into the
final drive position.
Start engine to avoid discharg-
ing battery.
Push rocker switch 1 up to
raise the windshield.
Push rocker switch 1 down to
lower the windshield.
5
61
z
Setting
To Next Page
Loading...
Need help?
General
