BMW C650GT - Page 71

Phase 1
The pointer of the speedometer
is run up to the end stop. The
warning and indicator lights are
switched on.
Phase 2
The speedometer pointer is
moved back. The switched-on
indicator and warning lights are
switched off.
If the pointer has not been
moved, or if one of the warning
and indicator lights has not been
switched on:
WARNING
Defective warning lights.
Lack of display of malfunctions.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The self-diagnosis routine
is determining whether
BMW Motorrad ABS is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition. To
check the wheel speed sensors,
the Maxi-Scooter must be driven
a few meters.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ABS warning lamp flashes.
Phase 2
Check wheel sensors while
starting off.
ABS warning lamp flashes.
ABS self-diagnosis
completed
ABS warning light goes out.
If an ABS error is displayed after
the ABS self-diagnosis is com-
pleted:
It remains possible to continue
riding. It must be noted that
the ABS function is not avail-
able.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ASC self-diagnosis
The self-diagnosis routine
is determining whether
BMW Motorrad ASC is ready for
operation. The self-diagnosis
6
69
z Riding