Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Allow engine to run in neutral
for one minute.
Switch off ignition.
Take off step plate support 1.
Remove cover 2 upward.
Wipe area around oil fill loca-
tion to clean it.
Remove oil dipstick 1.
Clean the measuring range 2
on the oil dipstick with a dry
cloth.
Position the oil dipstick on the
oil filler opening, but do not
screw in.
Remove oil dipstick and read
fluid level.
8
85
z
Maintenance
To Next Page
Loading...
