C
ylinder Head
Detach Air filter, seawater hose, fuel overflow hose, cylinder head vent hose clip,
Disassemble cylinder head cover with gasket, rocker shaft with rockers, pushrods
Remove
3
Removing cylinder head and cylinder
- Remove air filter (1)
- Loosen sea water pipe from exhaust manifold
and water pump and remove (2) + (3)
CAUTION
Cover all openings in the fuel system
- Disconnect fuel return hose from
injector and remove (4)
- Disconnect fuel injection pipe from
injector and injection pump and
remove (5)
- Remove clip of crankcase vent
hose (6), unscrew both nuts of the
rocker cover and remove the
rocker cover with gasket (7)
To Next Page
