Self-diagnosis not completed
ABS warning light flashes.
The ABS function is not avail-
able, because the self-diagno-
sis has not been completed. To
check the wheel sensors, the
motorcycle must be driven a few
yards.
Ride off slowly. It must be not-
ed that the ABS function is not
available until the self-diagnosis
has been completed.
ABS error
ABS warning light lights up.
The ABS control unit has detect-
ed an error. The ABS function is
not available.
Continued driving is possible.
It must be noted that the ABS
function is not available. Ob-
serve additional information on
situations which can lead to an
ABS error ( 73).
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
TPC displays
OE
Display
The warning symbol 1 signals
a critical tire pressure, and the
corresponding air pressure of the
front wheel 2 or the rear wheel 3
flashes.
If the critical value is at the
limit of the permissible tol-
erance, the general warning light
also lights up in yellow. If the de-
termined tire pressure is outside
the permissible tolerance, the
general warning light flashes in
red.
Additional information on the
BMW Motorrad TPC is provided
from page ( 74); an overview
of the possible warnings is pro-
vided on the following page.
3
32
z
Status indicators
To Next Page