Remove side panel upward.
Open cap of fill location for
coolant 1 by turning counter-
clockwise.
Pour in coolant up to specified
level.
Close cap of fill location for
coolant by turning clockwise.
Push side section behind lower
side panel while making sure
that guide 4 of side section
grips into mount 5.
Install three screws 3.
Install short screw 2.
Install two screws 1.
Position mirror.
Install screws 1.
Installing battery compartment
cover ( 113)
Clutch
Checking clutch operation
Pull the clutch lever.
Pressure point must be clearly
perceptible.
If no clear pressure point can be
felt:
Have the clutch checked by a
specialized workshop, prefer-
8
94
z
Maintenance
To Next Page