Using stopwatch as Lap-
Timer
Press and hold button 1 and
button 2 simultaneously until
display changes.
FLASH (display of engine
speed warning) and
ON or
OFF are shown.
Press button 2.
LAP (Lap-Timer) and ON or
OFF are shown.
Press button 1 repeatedly until
desired state is shown.
ON: Operation of stopwatch
with INFO button on handlebar
fitting.
OFF: operation of stopwatch
with button 2 in instrument
cluster.
To confirm setting, press and
hold button 1 and button 2
simultaneously until display
changes.
The settings are applied and
the last display is shown.
If no confirmation is made, the
last setting is retained.
Engine speed warning
The engine speed warning sig-
nals to the driver that the red
engine speed range has been
reached. This signal is shown in
red by the flashing of the anti-
theft alarm indicator light 1.
The signal is maintained until the
transmission is upshifted or the
engine speed is reduced. It can
be activated or deactivated by
the driver.
Activating engine speed
warning
Press and hold button 1 and
button 2 simultaneously until
display changes.
FLASH (display of indica-
tor light) and
ON or OFF are
shown.
4
45
z
Operation
To Next Page