Close lock straps 2.
Press case lid against case
body.
The case volume is adapted to
the contents.
Removing case
Turn lock barrel in direction
RELEASE.
Pull black release lever (RE-
LEASE) upward.
Pull case out of upper
mount 1.
Lift case out of lower mount 2.
Mounting case
Hook case into lower mount-
ing 2.
Pull black release lever (RE-
LEASE) upward.
Press case into upper mount-
ing 1.
Press black release lever (RE-
LEASE) downward.
Case is locked into place.
Lock case.
Check secure attachment of
case.
Secure hold
If a case wobbles or is difficult to
fit, it must be adapted to the gap
between the upper and lower
mounting. To achieve this, the
7
80
z
Accessories
To Next Page