Hold the new bulb by the base
only, in order to keep the glass
free of foreign matter.
Insert bulb 1, making sure that
the tab is correctly positioned.
Close and lock spring wire
clips 2.
Connect plug connection 1.
Install cover 1 for the high-
beam headlight or cover 2 for
the low-beam headlight, as ap-
plicable.
Replacing bulb for parking
light
Place the motorcycle on its
stand on firm, even ground.
Switch off the ignition.
NOTICE
Turn the handlebars to the left to
facilitate access.
Disconnect plug 1.
9
113
z
Maintenance
To Next Page
