Setting riding mode
Switching on ignition ( 42).
NOTICE
If a riding mode was selected
prior to switching the ignition off,
it remains further active after a
new starting.
Operate MODE 1.
The selection arrow 2 appears
on the display.
Operate MODE 1 until the se-
lection arrow 2 indicates the
desired riding mode.
The riding mode configured
last 3 remains on-screen.
At standstill:
Activated after approximately
2 seconds.
The selected riding mode is
activated when riding, providing
the following prerequisite have
been met:
Throttle grip is in idle position
for a short period of time.
Brake lever is not operated.
Activation completed.
The adjusted riding mode 3 is
displayed without a selection
arrow 2.
For riding on a rain-wet roadway:
Activate RAIN riding mode.
For riding on a dry roadway:
Activate ROAD riding mode.
with riding modes Pro
OE
For dynamic riding on a dry road-
way:
Activate DYNAMIC riding
mode 4.
Heated handlebar grips
with heated grips
OE
Operating the heated
handlebar grips
Start engine ( 76).
NOTICE
The heating in the heated
handlebar grips can be activated
4
53
z
Operation
To Next Page
