Yes:
Press button 1.
No:
Press button 2.
Under what
circumstances is
programming aborted?
Programming is cancelled by
switching off the ignition prior to
the last programming step, or it
is automatically cancelled if more
than 30 seconds elapse between
two programming steps.
The new settings are not saved if
programming is aborted.
Saving programming
Programming is automatically
saved by switching off the igni-
tion after the last programming
step or it is automatically saved
30 seconds after the last pro-
gramming step.
The anti-theft alarm LED goes
out and four acknowledgement
tones sound.
Registering additional
remote controls
with alarm system (DWA)
OE
When is it necessary to
register a remote control?
If you want to register an addi-
tional remote control or register
a remote control as a replace-
ment for one that has been mis-
laid, you must always register all
the remote control units with the
anti-theft alarm. You can register
a maximum of four remote con-
trol units.
Registering remote
control
Deactivate the alarm function.
Switch on the ignition.
Press button 2 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch off
the ignition.
Press button 2 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch on
the ignition.
5
63
z
Anti-theft alarm
To Next Page
Loading...
Need help?
General
