63
Maintenance and care
2
Cleaning/care
Washing the motorcycle
• Place the motorcycle on its
main stand on a firm, flat
surface
• Apply a mild cleaning agent to
the wheels, engine block,
transmission and swinging
arm, in accordance with the
manufacturer's instructions
• Thoroughly dry all wet
surfaces
• Clean/treat fairing elements
only with cleaning and care
products from the BMW
Cleaning and Care Set
• Do not use solvents or clean-
ing products on the instru-
ment group, switches or
windshield
• Clean the seat with water or a
soapy water solution. Do not
use solvents, cleaning prod-
ucts or preserving agents.
• Remove tar splashes only
with an approved cleaning
agent – rinse the affected area
thoroughly
• Clean flies and other insects
off the fork stanchions
• Treat painted and chrome-
plated surfaces regularly with
the approved care products
After cleaning and before
starting a journey, always test
the brakes.
20LTbku7.book Seite 63 Montag, 4. Juli 2005 9:27 09
To Next Page
