BMW k1200lt User Manual (English)

To Next Page

BMW Service

For safety reasons and to main-

tain the value of your motorcy-

cle, regular maintenance

intervals have been laid down.

Always keep to the specified

maintenance intervals. This is

the only way to ensure that war-

ranty claims are not invalidated.

The contents of the mainte-

nance schedules are subject to

change, for reasons of safety,

due to modifications in, among

other things, materials.

Your authorized BMW motorcy-

cle retailer can provide informa-

tion on the currently specified

Service, Inspection and Annual

Service work needed.

Important:

BMW refuses to accept liability

for damage or consequential

damage due to repairs or ser-

vice work performed by other

than BMW-authorized work-

shops.

Consequently, we advise you to

have service and maintenance

performed by your authorized

BMW motorcycle retailer's spe-

cially trained, expert personnel,

and confirmed by an entry in the

Maintenance Instructions.

Authorized BMW motorcycle

retailers are supplied with the

latest technical information and

have the necessary technical

know-how and specially trained

staff.

Please do not hesitate to con-

tact your authorized BMW

motorcycle retailer on all mat-

ters concerning your

motorcycle.

Authorized BMW motorcycle

retailers are fully informed about

all aspects of your motorcycle

and will gladly advise and assist

you.

Best wishes,

BMW Motorrad

Dear motorcycle enthusiast

20LT01u7.fm Seite 1 Montag, 21. Mai 2007 3:49 15

Need help?

Do you have a question about the BMW k1200lt and is the answer not in the manual?

BMW k1200lt Specifications

General

Displacement	1171 cc
Bore x Stroke	70.5 mm x 75 mm
Compression Ratio	10.8:1
Transmission	5-speed
Final Drive	Shaft drive
Front Tire	120/70 ZR17
Rear Tire	160/70 ZR17
Torque	115 Nm at 5, 250 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual 320 mm discs
Rear Brakes	Single 285 mm disc
Seat Height	800 mm (adjustable)
Fuel Capacity	24 liters
Engine Type	Liquid-cooled, 4-stroke, DOHC, inline-4