72 TFT DISPLAY
Riding time 2
Break 1
Break 2
Speed 1 (average)
Speed 2 (average)
with tire pressure monitor (TPM)
OE
Tire pressure
Fuel tank level
Range
Selecting content of driver info. status line
Call up menu Settings, Display, Sta-
tus line content.
Turn on desired displays.
It is possible to change between the se-
lected displays in the driver info. status
line. If no displays are selected, only the
range is shown.
Making settings
Select desired settings menu and confirm.
Turn the Multi-Controller 1 down until the
desired setting is highlighted.
If operating instructions are present, tilt
the Multi-Controller 1 to the right.
If operating instructions are present, tilt
the Multi-Controller 1 to the left.
The setting is saved.
Switching Speed Limit Info on or off
Requirement
The vehicle is connected to a compatible
mobile end device. The BMW Motorrad
Connected app is installed on the mobile
end device.
Speed Limit Info displays the currently
permitted maximum speed insofar as this
information is provided by the editor of
the maps in the navigation system.
Call up menu Settings, Display.
Switch Speed Limit Info on or off.
PURE RIDE VIEW
Range
The range 1 indicates how far you can ride
with the remaining fuel. This distance is cal-
culated based on average consumption and
the remaining fuel quantity.
When the vehicle is propped on its side
stand, the resulting angle of inclination
means that the sensor cannot register the
fuel quantity correctly. For this reason, the
range is only recalculated when the side
stand is folded in.
The range is displayed together with a
warning once the fuel reserve is reached.
After refueling, the range is recalculated
if the fuel quantity is greater than the fuel
reserve.
The calculated range is only an approxi-
mate figure.
To Next Page
Loading...
