Step 1: Install Bob’s Side Brush
Install Bob’s side brush to help him reach the corners and edges of rooms.
Quick Start
Getting Started
Get Bob Started: Bob will be ready to clean in just 3 easy steps.
R L
1. Flip Bob over onto a at surface. Place the
side brush over the empty socket on Bob’s
underside.
Screw Guide:
Main Brush Screw
Side Brush Screw
2. Secure Bob’s side brush into the socket
using the at head screwdriver and screw.
Parts You’ll Need: Side Brush Side Brush Screw Flat Head
X1 X1 Screwdriver
!
Use the additional side brush and
screw as spares.
Quick Tip:
1413
To Next Page
Loading...
