Quick Start
Troubleshooting
Troubleshooting: (No Part Name)
Oops! I feel there’s something funny going on
with my: (No Part Name)
Parts You’ll Need: Phillips Head Screwdriver
(not included)
If Bob stops working and displays a trouble message with no part name, then his front
wheel may be congested.
What to do:
Gently grip the wheel assembly and pull up.
Use a screwdriver for leverage, if needed.
Open the front wheel assembly using
a Phillips head screwdriver. Clean the
assembly’s inner parts.
Replace the wheel and make sure it spins
freely inside the wheel assembly.
1.
2.
3.
9493
To Next Page
Loading...
