Quick Start
Troubleshooting
Troubleshooting: Edge Sensors
Oops! I feel there’s something funny going on
with my: Edge Sensors
Parts You’ll Need: Cloth
(not included)
What to do:
Wipe the edge sensors with a soft cloth
slightly dampened with cold water or alcohol.
If problems persist, deactivate the edge
sensors. Hold down the CHECKUP button
on Bob’s cover. The 4 bars above the word
“checkup” will start to ash on his screen.
1.
2.
Release the button when
the bars stop ashing
and remain lit.
7877
To Next Page
Loading...
