Orb-i’s First Clean
Self-empty Charging Station Indicator
Light Status Station Status What to do
Off Powered OFF Plug into the outlet.
Solid Blue Ready Station is ready for Orb-i to charge / self-empty.
Solid Red
Dust Bag not detected / Dust
Bag’s opening is closed.
Insert Dust Bag into the slide and push the tab
all the way down to open and line up with the
air pathway.
Blinking
Red
Congestion in air pathway.
• Remove and open the dustbin to clean and
remove heavy congestion.
• Clean the Disposal Vent Aperture on the
back of the dustbin. Check the ap for free
movement.
• Place Orb-i on the station and press ‘Charge’
to initiate a self-empty.
If the airpathway does not clear:
• Unplug the station, turn the station around
to open the Air Pathway Access Window
and remove any congestion from the air
pathway.
• Place Orb-i on the station again and press
‘Charge’ to initiate a self-empty.
When Orb-i nishes docking on his charging station, and there is no station error, the indicator light on
the station turns off.
13
To Next Page
Loading...
