Sensors
1.
Wipe the edge and wall sensors. 2. Wipe the charging nodes on Orb-i and
his station.
3. Wipe the metal connectors on the
dustbin.
4. Wipe the top and the area around the
SLAM LiDAR.
Use a soft cotton cloth to wipe the sensors.
Maintenance
Important Note: Orb-i’s SLAM LiDAR is a sensitive sensor. Do not apply force, insert objects, or
adjust the SLAM LiDAR. Do not sit on Orb-i or place items on top of him.
Maintenance
To Next Page
Loading...
