Body Solid G3S - Page 29

10
29
STEP
Diagram 1
Cable Installation
WARNING
!
!
Diagram 1A
Start by installing
pulley (A6).
Selector Rod Top Bolt (22) must be threaded a minumum
of 1/2” into the Selector Rod (21), and Jam Nut (25)
tightened securely against spring lock washer (24) to
ensure proper connection. Check the Jam Nut (25) once
a week to make sure it is tight.
Diagram 2
Pulley Installation
Lat
Pulldown
Cable