BODYMAX TM50 - Storage and Transport; General Instructions; Transportation Wheels; Folding Mechanism

33
4 STORAGE AND TRANSPORT
4.1 General Instructions
⚠ WARNING
+ The storage location should be chosen so that improper use by third parties or children can
be prevented.
+ If your equipment does not have transportation wheels, the equipment must be
disassembled before transportation.
࣑ ATTENTION
+ Make sure that the equipment is protected from moisture, dust and dirt in the selected
storage location. The storage location should be dry and well ventilated and have a constant
ambient temperature between 10°C and 35°C.
4.2 Transportation Wheels
࣑ ATTENTION
If you want to transport your equipment over particularly sensitive and soft oor coverings, such
as parquet, planks or laminate, lay out the transport route with cardboard or similar to avoid
possible oor damage.
1. Stand behind the equipment and lift it until the weight is
transferred to the transportation wheels. After that, you easily
can move the equipment to a new position. For long transport
distances the equipment should be disassembled and safely
packed.
2. Select the new location by following the instructions in the
section 1.4 of this manual.
4.3 Folding Mechanism
⚠ WARNING
+ The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the section 2.1 of this
manual.
+ Do not lift the treadmill by the running mat or the rear transporting wheels. These parts do
not lock and are dicult to grab.
L NOTICE
The treadmill is foldable and thus saves space when it is stored. It also makes it easier to transport.