31 Cross countersunk screw M5*15 (full threaded) ROHS plating blue-white zinc
plating
2
32 at washer φ23*φ5.5*2 ROHS blue-white zinc plating 2
33 bearing 6203-2Z 2
34 V belt 8EPJ242 2
35 Aluminum pulley bracket ADC12; Φ 0.2 sandblasting with stainless steel sands 1
36 Pulley axle Φ28.5*74.7;, 40Cr; HRC30~35 1
37 Wave spring washer φ23*φ17.5*0.25 ROHS Black oxide coating 1
38 Axial spring collar φ17 ROHS Black oxide coating 1
39 Pully Φ55*22.3, with iron-based powder insert 1
40 Round head at key type (A) 5*5*14 ROHS blue-white zinc plating 1
41 Motor base 100*76.6*63.5*3; ADC12; Φ0.2 sandblasting with
stainless steel sands
1
42 Hexagon socket head cap
screw
M8*12 (full threaded) grade 8.8 ROHS blue-white
zinc plating
2
43 Left front side strip 554.5*57.5*20*3, ABS, VDI27,425U 1
44 Left front cover 802*96*31*3, ABS+PET membrance IML, Silver
plating
1
45 Sensor spacer POM, original color 2
46 Sensor rod M8*26;SUS304;ROHS 2
47 Pressure Sensor 50KG, wire length 450mm, with terminal 2
48 Sensor mounting plate 57*34*1.5; Q235; blue-white zinc plating 2
49 Hexagon socket head cap
screw
M4*12 (full threaded) ROHS black zinc plating 6
50 Hexagon socket head Nylok
cap screw
M512 (whole threaded) 8.8 grade RoHS blue-white
zinc plating with local Nylok application
20
51 Hexagon socket head coun-
tersunk Nylok screw
M6*25 8.8 grade ROHS blue-white zinc plating with
local Nylok application
29
52 Hexagon at round head cap
screw
M8*12 (full threaded, screw head 13.5~14mm)
grade 8.8 ROHS blue-white zinc plating
4
53 Hexagon socket head cap
screws
M8*15 (full wire) 8.8 grade ROHS black-zinc plating 1
54 Front roller Φ47*Φ38*Φ15*481 1
55 Wire clip Wire protection sleeve C3510, φ17*φ10*7.6, silicone,
original color
1
56 Lower control board guard T0.5mm galvanized plate 1
57 Front aluminum frame 512*102*60*2.5; ADC12; Φ0.2sandblasting with
stainless steel sands
1
29
To Next Page
Loading...