Bodystat 1500MDD - Enter Subject Data

23
ENTER SUBJECT DATA
Switch the BODYSTAT® 1500MDD unit ON. No message will be displayed on
the touch screen LCD screen if the battery is flat, in which case replace the
batteries with new Duracell/Procell Batteries.
Select the New Test button on the screen to perform a Bodystat measurement.
Once the new test option has been selected, the following screen will be
displayed:
The 1500MDD unit automatically allocates the next available number. The test
number is used to identify the subjects’ data if tests are to be recalled for viewing.
It is, therefore, recommended that a manual record of the test numbers should
be maintained against the respective subjects.
The first option available is for gender. Select the M for Male or F for Female.
Press the <> key to move down to the next input option.
Age, Height, and Weight
all have numerical
selections and can be
entered by choosing the
appropriate numbers for
that field. Once each
option has been entered,
press the <> key to
move down to the next
input option.
Height and weight may be displayed either in imperial or metric (refer
CUSTOMISING YOUR UNIT).
Once the weight option has been entered, the user can either select the next
button to move to the next screen or the proceed button to move to the
measurement screen (without entering waist/hip or activity levels). If the
waist/hip and activity screen is skipped at this stage, then the device will use the