RECALL SUBJECT DATA
This feature allows an operator to recall, at a later stage, both the input and
output test data for manual recording purposes or entry into other computer
software programs such as spreadsheets, etc. However, it would be more
efficient to download the data into our Software Program supplied with the
BODYSTAT® 1500MDD unit and then in turn to easily save the subject data in
Excel, XML or CSV files.
At the time of subject data entry, a test number is automatically allocated by the
BODYSTAT® 1500MDD unit. It is advisable to manually record the name of the
subject being tested against that number. This will enable an operator to
subsequently recall data of the correct subject number.
A maximum of 100 tests will be stored in the memory of the BODYSTAT®
1500MDD unit at any one time. When the memory reaches its maximum
capacity FOR THE FIRST TIME, and a further test (number 101) is performed,
the oldest number, i.e. test number 1, is automatically dropped from the memory.
At all times thereafter, the most recent 100 tests will always be stored but
successive tests will be numbered in ascending order, i.e. 101, 102, 103, etc to
a maximum number of 99,999. Thereafter, the numerical series will
automatically revert back to number 1. Thus each test will maintain its own
unique allocated number for subsequent recall purposes.
To Next Page
Loading...
