Bohle GlassBuddy Basic - Glass Types and Measuring Ranges

To Next Page

To Previous Page

12 Glass Types and Measuring Ranges

Speciﬁcation

GlassBuddy Basic GlassBuddy Plus

Monolithic glass yes yes

Monolithic laminated glass (lam) yes yes

Monolithic laminated safety glass (lam-safety) yes yes

Monolithic multi-laminated glass (multi-lam) yes yes

Monolithic multi-laminated glass for ﬁre protection no yes

1-gap insulating glass made of 2 x monolithic glass yes yes

1-gap insulating glass with laminated glass yes yes

1-gap insulating glass with laminated safety glass yes yes

1-gap insulating glass with multi-laminated glass no yes

1-gap insulating glass with multi-laminated glass as

ﬁre protection glass

no yes

2-gap insulating glass made of 3 x monolithic glass yes yes

2-gap insulating glass with laminated glass yes yes

2-gap insulating glass with laminated safety glass yes yes

Detection of interlayers yes yes

Identiﬁcation of position and thickness of the

interlayer

yes yes

Graphic display of measured results yes yes

PC software with graphic display yes yes

Software update online yes yes

Multiple languages yes yes

Art. no. BO 5164760 BO 5164755

Measuring range depending on gap between

panes

The following glass types or structures cannot

be measured or only to a limited extent:

– Strongly dispersing glass like e.g. satin-ﬁnished or

sandblasted glass, cast glass

– Strongly absorbing glass such as e.g. laminated

glass with matt or coloured interlayers, entirely

coloured glass

– Glass with interference coating

– Highly reﬂective glass like e.g. solar control glass

– All basic glass products deviating from

DIN EN 572 Part 2

Gap between panes mm

Maximum total thickness

depending on gap in mm